離心風機的操作規程有哪些?安全規程又有哪些?這也是每個使用者所關心的問題。
What are the operating procedures for centrifugal fans? What are the safety regulations? This is also a concern for every user.
一、離心風機的操作規程
1、 Operating procedures for centrifugal fans
1.運轉前的檢查
1. Inspection before operation
(1)檢查軸承潤滑情況良好,離心風機內無異物;
(1) Check that the bearing lubrication is in good condition and there are no foreign objects inside the centrifugal fan;
(2)檢查各手動、電動擋板是否靈活;
(2) Check whether each manual and electric baffle is flexible;
(3)檢查各螺栓是否緊固、脫落;
(3) Check whether each bolt is tightened or detached;
(4)確認軸承冷卻水是否暢通。
(4) Confirm whether the bearing cooling water is unobstructed.
2.運轉中的檢查
2. Inspection during operation
(1)檢查電機運轉是否平穩,是否有異音、異振、異溫、異味;
(1) Check whether the motor runs smoothly and whether there are any abnormal sounds, vibrations, temperatures, or odors;
(2)檢查軸承溫度、油量、冷卻水是否正常;
(2) Check whether the bearing temperature, oil quantity, and cooling water are normal;
(3)檢查風機運轉是否平穩,是否有異音、異振;
(3) Check if the fan operates smoothly and if there are any abnormal sounds or vibrations;
(4)檢查出口風管是否因開裂而導致漏風;
(4) Check if the outlet air duct is leaking due to cracking;
(5)檢查各人孔門是否密封好;
(5) Check if the manhole doors are properly sealed;
(6)檢查擋板顯示是否與中控顯示一致;
(6) Check whether the display of the baffle is consistent with the display of the central control;
(7)檢查螺栓是否松動、脫落。
(7) Check if the bolts are loose or detached.
3.日常維護與保養
3. Daily maintenance and upkeep
(1)檢查風機葉片磨損情況,清理葉片上的積灰;
(1) Check the wear of the fan blades and clean the accumulated dust on the blades;
(2)清洗軸承,檢查軸承潤滑脂、潤滑油,并及時補充、更換;
(2) Clean the bearings, check the lubricating grease and oil of the bearings, and timely supplement and replace them;
(3)檢查風機內是否有雜物,關閉人孔門并密封好;
(3) Check if there are any debris inside the fan, close the manhole door and seal it properly;
(4)檢查各螺栓是否松動、脫落,并及時緊固、更換。
(4) Check whether each bolt is loose or detached, and tighten and replace it in a timely manner.